Name: Brake Stop Light &amp; Clutch Lever Switch - Hyosung GV125 GV250
SKU: 57460H93B00-GV
Availability: InStock

Brake Stop Light & Clutch Lever Switch – Hyosung GV125 GV250

Estimated delivery dates: May 16, 2026 - May 18, 2026

£12.99

💎 BRAKE & CLUTCH LEVER SWITCH | FIX START/STOP ISSUES

Problem Solved: One switch, two critical fixes. Restores front brake light activation (all models) AND fixes non-starting issues caused by a faulty clutch switch (EFI models). A direct-fit, high-quality aftermarket part built to OEM specs.

✅ Function: Multi-purpose safety and start switch.
🛠️ Installation: Direct plug-in replacement (Works with OEM connector).
⚙️ Reliability: Test-fitted on donor bikes—snug fit & spot-on function.
📦 What’s Included: 1x Lever Switch

(Order Qty 2x if you need both sides for carb model clutch & brakes!).

⚠️ CRITICAL NOTE: On EFI models, a broken clutch switch may prevent your bike from cranking *at all*! Replacing this part is an essential fix.

Description

A small but vital component in your Hyosung’s electrical system. This aftermarket switch serves two purposes depending on where it’s fitted: activating your front brake light or confirming the clutch is pulled in so your bike can start. When these fail, safety and reliability are compromised. This direct replacement ensures functionality is restored immediately for life on the road.

💎 One Switch, Reliable Performance

A quality replacement part that matches OEM specifications for critical safety and starting functions.

Safety Essential Ensures brake light function.	OEM Reference Matches 57460H93B00.
Get Started Can be used as Clutch Switch.	Multi-Use Brake or Clutch function.

📜 Confirmed Fitment Guide

✅ GV125 (Carb Models): Used for Front Brake Light switch or Clutch Switch for some models (Up to 2017).
✅ GV250 (Carb & EFI Models): Used for Front Brake switch AND/OR Clutch lever switch (Up to 2017).
❌ WILL NOT FIT: GV650 models (cable is too short).

💡 RECOMMENDED PAIRING:
If you’re fixing your front brake switch, consider a fresh bottle of [DOT 4 Brake Fluid] to flush your system for maximum stopping confidence!

🔧 Install Tips

Identify Location: Locate the old switch on either your clutch or front brake lever assembly. It simply pops out.
Easy Swap: Unplug the old unit and plug the new one in. No complex wiring needed.

📧 FITMENT QUESTIONS? Email us a photo of your existing switch if unsure. For technical help or community opinions, visit the HyoRiders Forums.