X-Ring Chain & Sprocket Conversion Kit – Hyosung GV650 [2006-2018] [Belt & Pulley Replacement]

Description

Tired of hunting for factory drive belts or dealing with endless backorders at your local dealer? When your standard GV650 belt snaps or suffers from dry rot, switching to a GV650 belt chain setup is the ultimate way to future-proof your cruiser. This custom-engineered package completely deletes the fragile pulley system. We bundle an ultra-strong 520 X-Ring chain rated for massive 1000cc engines alongside 520 front and rear sprockets. This setup fixes the belt-pulley parts shortage problem permanently, meaning you can pull into any local bike shop down the line and grab standard chain spares without a fuss.

This is a highly tailored kit designed to keep your fat 180-section rear tyre completely clear of chain rub. The front sprocket uses a specialized hump offset to push the link line safely away from the engine casing. At the rear, the high-tensile 6-bolt sprocket includes a dedicated set of hub washers that space the teeth outward, providing flawless clearance.

💖 Tested directly on Scottish roads by our GV650 test rider @Chopper, this hybrid gearing profile hits the absolute sweet spot. Expect crisp throttle response off the line, snappy delivery through the twisties, and reduced RPMs for relaxed highway cruising that stretches your fuel mileage significantly further on long journeys. Our kit should expect to reduce your revs a little bit when doing motorway speeds

💎 What is Inside The Kit

📜 Confirmed Fitment Guide

🔧 Install Tips

• Guard Trimming Required: You will be able to lock your factory top chain guard and your front engine casing cover back on perfectly. ⚠️ However, the lower plastic belt cover must be left off completely.
• Space Your Hub: Always place the provided spacing washers flat behind the rear wheel sprocket teeth before tightening down the long high-tensile mounting hardware to ensure perfect tyre clearance.
• Lock it Down: Don’t guess the torque on your front output drive axle. Use a proper breaker bar, apply a touch of threadlock, and fold the heavy tab washer flat against the nut flat edges securely.