Speedometer Instrument Cluster Backlight Bulbs Set – Hyosung GT125R GT250R GT650R

Description

Riding around with a dark gauge cluster is annoying and makes it hard to track your road revs at night. These indicator wedges are the correct glass-style fit for the first generation of faired sports bikes. Unlike newer clocks that use sealed LED circuit boards, these classic clock housings let you pull out a dead twist plug and swap the old wire glow piece inside. Fitting a fresh dash bulb pack is a quick fix to keep your speedo fully visible under dull skies or on poorly lit local roads.

💎 COCKPIT REPAIR DASH BULB SPECIFICATIONS

📜 VISUAL FITMENT CHECK FOR YOUR NEW DASH BULB SET

🔧 INSTALL TIPS FOR A FRESH DASH BULB SET

• Use Clean Gloves: Avoid handling the new glass bulbs with bare fingers. The natural oils from your skin can leave grease smudges on the glass, creating tiny heat spots that cause the bulb to burn out early. Wrap a clean cloth or tissue around them when pushing them home.
• Careful Housing Access: You will need to unbolt the main gauge cluster assembly from its stay stay bars behind the windscreen. Be gentle when pulling out the twisty rubber socket plugs, as older wire lines can become brittle from years of hot engine air.
• Test Before Reassembly: Always flick your ignition key switch on to confirm that both dial backlights light up bright before you spend time bolting all your front fairing panels and plastic trim pins back together.