Rear Brake Stop Light Switch – Hyosung GD250R GD250N Exiv
Stay noticed and safe on everyday roads. This aftermarket switch fits the GD250R and GD250N models perfectly. It is not identical to the original layout, but it has been test-fitted and works flawlessly as a direct plug-and-play safety upgrade.
- Function // Activates the rear brake light instantly upon pedal movement.
- Installation // Direct fit into the standard 2-pin white wiring harness block.
- Quality // Fully bench-tested on local donor bikes for clean contact delivery.
- What’s Included // 1x Rear Brake Light Switch (Note that you reuse your original spring).
Description
A functional rear brake stop light is non-negotiable for everyday safety. For the sports-styled GD250R and the naked-chassis GD250N, ensuring instant rear-end warning illumination whenever you tap the foot brake lever is absolutely necessary to stay visible. This aftermarket version is a durable solution to replace a burnt-out or stuck original switch assembly, keeping your bike fully legal and noticeable on the tarmac.
💎 Upgrade Your Safety & Stay Noticed
| Direct Fit HarnessPlugs cleanly into your standard loom with no loose wires or splices. | OEM ReferenceAccurate spacing design to replace factory part 37740HN9100. |
| Reliable ActivationInternal slider pins for instant rear light warning response. | Test FittedEach batch run is physically inspected before dispatch. |
📜 Model Fitment
Confirmed Matches: Fits Hyosung GD250R and GD250N Exiv single-cylinder setups from 2013 to 2019 running the standard 2-pin white plastic loom plug.
Older generation GT or GV V-Twin models.
While updating your footway electrical links, remember to verify that your front handlebar Brake Light Switch triggers the bulb correctly too! Total road visual coverage requires both control points to engage instantly when slowing.
🔧 Install Tips
- Reuse Original Spring: This replacement switch block arrives as a standalone unit and does not include the metal extension spring. Simply unhook the small return spring from your old failing cylinder and loop it into the new plunger eyelet.
- Check Your Connector: Do a quick visual check behind your right hand rearset plate to verify your main wiring loom uses the matching square 2-pin female socket configuration prior to checkout.
Additional information
| Weight | 0.6 kg |
|---|---|
| Dimensions | 20 × 20 × 3 cm |
You must be logged in to post a review.
GARAGE PICKS // ADD TO BUILD
EXPLORE // RELATED PRODUCTS
-
Magnetic Oil Drain Plug [Sump Bolt] – Hyosung GV125 GT125R GV GT250 GV650 GT650 RX RT 125
£9.99 -
Upgrade Regulator Rectifier [Big Heatsink] – Hyosung GT/GV 125 250 Carb Models
£34.99 -
Stainless Steel Rear Brake Line [Hose Kit] – Hyosung GT650 GT125R GT250 GT125
£59.99 -
Engine Front Sprocket Washer Safety Lock – Hyosung GV125 GT250 GT125R RX125 GV250
£7.99
Independent Shop supplying ride enhancements and quality spares with fast dispatch. Need assistance? Access our workshop guides, manuals, tutorials or drop by the forums for troubleshooting help.
Reviews
There are no reviews yet.