Gudgeon Pin Piston Circlips (2x Circlip Snap Ring) – Hyosung GT125R GV125 GT125
Don’t Let a Tiny Clip Stop Your Rebuild. These piston circlips (snap rings) are essential for securing the gudgeon pin. Easily lost or “launched” during installation, we supply these as a matched pair to ensure your 125cc V-Twin restoration stays on track.
- ✅ Engine Essential: High-tension spring steel for a secure, permanent lock.
- 🛠️ Direct Replacement: Fits all 125cc V-Twin carburettor models perfectly.
- ⚙️ Workshop Insurance: Supplied as a pair (2x clips) — because spares are a must.
- 📦 What’s Included: 2x Piston Circlips (Covers 1 Piston).
Description
During an engine overhaul, it is the smallest parts that cause the biggest delays. These gudgeon pin circlips are notorious for disappearing in the workshop. Since original Hyosung parts for the legacy GT and GV series are no longer produced, these high-quality replacements are vital for any 125cc rebuild. We justify the value by providing 2026-spec high-tension steel that ensures your piston assembly remains oil-tight and structurally sound under high RPM.
💎 Small Part, Massive Importance
Precision-engineered tension clips designed to fit the original 125cc piston grooves without play.
| High Tension Steel Resists vibration and heat. |
Snug Fitment Matches OEM 125cc groove specs. |
| Workshop Essentials Don’t reuse old, tired clips. |
Fast Dispatch UK stock ready to ship. |
📜 Confirmed Fitment Guide
📅 YEARS: 2001 through to 2017 (Legacy Carby V-Twin engines).
❌ WILL NOT FIT: GV125-S EFI (2018 onwards) or any 250cc/650cc models.
Never rebuild with old seals. Ensure a perfect compression lock by grabbing a fresh Engine Gasket Set while you have the top-end apart. Browse Gasket Kits here.
🔧 Install Tips
- Orbit Warning: These clips are spring-loaded! Use needle-nose pliers and take your time. They can easily fly across the room if they slip during installation.
- Block the Crankcase: Always stuff a clean rag into the crankcase opening around the connecting rod before fitting these. If a clip drops, it won’t fall into the bottom of the engine!
- Check the Click: Ensure the clip is fully seated in the piston groove before moving to the next step of your rebuild.
**Reference OEM #: ** 09381H14001.
📧 FITMENT QUESTIONS? Email us with your bike details. For technical help or community opinions, visit the HyoRiders Forums.
Additional information
| Weight | 0.20 kg |
|---|---|
| Dimensions | 30 × 20 × 2 cm |
You must be logged in to post a review.
GARAGE PICKS // ADD TO BUILD
-
Header Pipe Copper Exhaust Gasket & Full Stainless Stud Nut Kit – Various Hyosung Models
£9.99 -
Bespoke Transparent “Clear View” Clutch Cover – Hyosung GT/GV 125 250
£199.95 -
Stator Magneto Generator Cover Gasket – Hyosung GT125 GV250 GT250 GV125
£29.99 -
EGR Valve Blanking Plate / AiS Delete Block Off Kit – Various Hyosung Carb Models
£11.99
EXPLORE // RELATED PRODUCTS
-
Brake Disc Rotor Bolts [x6] – Hyosung GT125R GT650 GV250 RX125 GT250 TE450
£12.99 -
NGK Uprated HT Coil Spark Plug Cap/Covers [x2] – Hyosung GTR GT GV (Various Models)
£34.99 -
![Engine Front Sprocket Washer [Safety Lock] - Hyosung GV125S Bobber EFi](https://i0.wp.com/hyoriders.club/wp-content/uploads/2020/04/xgv125spkwshr.jpg?fit=362%2C362&ssl=1)
Engine Front Sprocket Washer [Safety Lock] – Hyosung GV125S Bobber EFi
£8.99 -
Heavy Duty Clutch Springs Set [x5] – Hyosung GV125 GT125 GT125R
£19.99
Independent Shop supplying ride enhancements and quality spares with fast dispatch. Need assistance? Access our workshop guides, manuals, tutorials or drop by the forums for troubleshooting help.
Reviews
There are no reviews yet.