Crankshaft Bearing – Hyosung GT125 GV125 GT250 GV250 RT125 RX125

Description

Engine CrankShaft Bearing – Hyosung GT125 GV125 GT250 GV250 RT125D RX125

Replacement Crankshaft Bearing for the v-Twins & single Piston Hyosung 125cc/250cc models (See full list below⤵)
Usually you will replace the crankshaft bearing when either of the following applies:

• Engine Rebuilds / Project Repairs
• Old Engine is getting an overhaul
• Old bearing has lot of mileage and has worn down
• Bearing is making noises while running

💡 Tip: A fresh 125cc cam chain (since they usually wear down sooner than the 250cc sister)  will also prolong the life of an older high mileage engine and it will keep your timings accurate as your valves go up & down while the crank or clutch basket spins the chain.  After all it is these bearings that spin the camshafts and your cam chains! 

Yes, it fits either left side or right side. Usually it is a good idea to replace both at the same time for even wear.

 🔧 Make sure you use a service manual or have a professional install this for you, as any mistakes can ruin your engine for good (like snapped/damaged teeth on your crank shaft, and a new crank is expensive) 😬

 You will get TWO Bearings (2x)  

 If you want 4x bearings, please add “2x” at the checkout! 👍  

 Special Order (Extra Time Needed)  
UK Delivery is 5-8 working days.
Please contact us first, if it is urgent
✈ We ship worldwide, send us an email for a quote 

🛠 Fitting Instructions:  None included sorry.  For experienced mechanics.
Post a topic on the forum, if you have a technical question on rebuilding your engine or download the service manual or consult your local mechanic first. 

🏍 Model list:

❌ It will not fit  EFi  Models of GV125-S [2019-2025+]
❌ It will not fit  650cc  Models

OEM# = 09262H35002 , 09262H350A60A0