Jet Needle x2 [for Carb Diaphragm Slide] – Hyosung GT125 GT125R GV250 GT250R GV125

Description

When the main black rubber throttle slides wear down, the center fuel rods often need a total swap out too. Sourcing this premium aftermarket Hyosung carb jet needle set is a massive step above standard factory service components. The added adjustment clip slots give you complete power over your fuel flow settings. This makes it incredibly straightforward to alter your fuel mix to match airflow updates like our high flow filter upgrades or fix an old rich running issue that drops performance. It is a vital kit for keeping your twin running smooth and getting the absolute most from your motor on local roads.

💎 FUEL MIXING HYOSUNG CARB JET NEEDLE SPECIFICATIONS

📜 Confirmed Fitment Guide

🔧 Install Tips

• Start in the Dead Middle: If you are not completely sure which slot height fits your engine setup best, snap the round E-clip right into the center slot position (the third groove down from the top) to use as your base tuning mark.
• Read Your Spark Plugs: Take your bike out for a steady run on local roads and pull your spark plugs afterwards to examine the tip color. A dark tan or chocolate brown look means your mix is perfectly balanced. Clipping the ring into the lowest bottom groove opens the fuel flow wide for the richest setting.
• Seek Help If Stuck: Balancing fuel flow inside twin carb bodies requires patience and care. If you feel stuck balancing your sliders or setting your clip heights on the workbench, you can find a local garage or read up on common owner setups inside the community guides.