Rear Brake Disc Pads – Hyosung GV300S Aquila Bobber 300 S
Get reliable, high-quality braking power for your Bobber. These pads are built for the GV300S ABS system, ensuring peak performance when you need it most. We supply only genuine factory parts or high-grade aftermarket versions.
- Quality Assured // OEM Hyosung or trusted Aftermarket alternatives.
- Function // Designed to work seamlessly with the factory ABS system.
- Reliability // Ensures safe, consistent stopping power in all conditions.
- What’s Included // 1x Pair of Rear Brake Disc Pads.
Description
Good brakes are crucial for your safety and the performance of your Hyosung GV300S. As the first in the low-cc Aquila line with full ABS, your pads work hard during everyday rides. We provide only high-quality OEM or trusted aftermarket versions to ensure your braking system performs reliably, keeping you on the road and safe. Never gamble on brake quality.
💎 Upgrade Your Stopping Power
| ABS CompatibleWorks perfectly with factory electronic safety modulators. | OEM Reference MatchAccurate backing plates matching original factory part 69301KH9100. |
| Quality MaterialStops reliably in wet or dry conditions and reduces brake fade. | Total Peace of MindBoutique safety-checked kit that ensures complete road confidence. |
📜 Model Fitment
Confirmed Matches: Fits the following fuel-injected modern bobber variants:
- Hyosung GV300 & GV300S Bobber: Fits all Aquila 300 S configurations from 2019 onwards (including SS, Supreme, and European boutique market alternatives).
Any GV125, GV125S, or old-generation GV250 models. Lighter engine chassis run completely different rear brake calipers.
Don’t forget the front brakes! We highly recommend pairing these rear replacements with fresh Front Brake Pads for the GV300S to guarantee completely balanced stopping power lock-to-lock.
🔧 Install Tips
- Clean the Caliper: Clean the caliper thoroughly with specialized spray to remove thick road dust and debris before sliding the fresh material home. Spread a tiny, thin layer of high-temperature grease behind the back plates to prevent squealing.
- Check Disc Condition: Inspect your rear steel brake disc rotor carefully for deep groove lips, scoring, or thermal warping. Fitting smooth pads onto a warped disc limits stopping area performance.
- Torque to Specification: Clean the pin sliders and use a manual wrench to tighten all caliper mounting bolts down to factory manual specs. Remember to pump your foot pedal a few times after installation to restore solid hydraulic system pressure before riding!
Contact us to confirm your model if you are not sure or else, For bleeding manuals or technical advice, head to the forums.
Additional information
| Weight | 0.7 kg |
|---|---|
| Dimensions | 10 × 10 × 2 cm |
You must be logged in to post a review.
GARAGE PICKS // ADD TO BUILD
EXPLORE // RELATED PRODUCTS
-
Upgrade Regulator Rectifier [Big Heatsink] – Hyosung GT/GV 125 250 Carb Models
£39.99 -
Braided Fuel Line & BIG Filter Kit – Hyosung GT125 GT250 {Carby Models}
£15.99 -
Anodized Magnetic Oil Filler Cap Plug Bolt – GT125R GV125 GT125 Hyosung
£9.99 -
Uprated Clutch Friction Plates & Drive Overhaul Kit – Hyosung GT250 GV250 GT250R
£75.99
Independent Shop supplying ride enhancements and quality spares with fast dispatch. Need assistance? Access our workshop guides, manuals, tutorials or drop by the forums for troubleshooting help.
Reviews
There are no reviews yet.