Throttle Position Sensor (2-Bolt Type TPS) – Hyosung GT650R GV650 GT650 ST7 GV700i
Solve jumpy throttle response and fuelling issues. This aftermarket TPS is a direct replacement for the specific 2-bolt style found on early Hyosung 650cc models. A crucial electronic component often overlooked during maintenance.
- 🛠️ Direct Replacement: Designed specifically for the 2-bolt mounting mechanism.
- 📦 What’s Included: 1x TPS Sensor (2-bolt type, counter-clockwise rotation).
Description
If your 650cc V-Twin feels inconsistent or jumpy at low throttle openings, the Throttle Position Sensor is usually the first suspect. This high-quality aftermarket unit provides an accurate, reliable signal to your ECU, restoring smooth power delivery. This specific model is a bolt-on installation for the early 2-bolt throttle body configuration used up to approximately 2014. We verify fitment on our own donor bikes, so you can be confident in a reliable swap.
💎 PRECISION FUELLING COMPONENT
| Restores Throttle FeelFixes jumpy response. | OEM RotationRotates counter-clockwise. |
| Durable ElectronicsBuilt to last longer than stock. | Direct Bolt-OnNo crazy drilling needed. |
📜 Confirmed Fitment Guide (Up to 2014 Models ONLY)
FITMENT NOTE: Early throttle body styles only. Verify your old housing type before ordering.
- Models: GT650, GT650R, GV650 Aquila, ST7 / GV700i
- Years: Approx. 2005 to 2014 models that use the 2-bolt type TPS.
- OEM Reference: 13580HP9301
❌ WILL NOT FIT THESE MOTORCYCLES:
- Delphi Fuel Systems: Models equipped with Delphi electronics or newer generation throttle sensors (~2015 onward).
🔧 Install Tips
- Clean the Bodies: Make sure your throttle bodies are clean and free of carbon buildup before fitting the new TPS.
- Alignment/Calibration: The sensor needs to be aligned correctly. It may need fine-tuning or calibration with a multimeter/scan tool depending on your specific ECU setup. Check our forums for guides!
- Double Check Fitment: Compare your old sensor with our product photos before ordering to prevent a return. Email us if unsure!
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 20 × 10 × 5 cm |
You must be logged in to post a review.
GARAGE PICKS // ADD TO BUILD
-
NGK LASER Iridium Spark Plugs x2 – Hyosung GT/GV 125 250 650 Models
£29.99 -
NGK Uprated HT Coil Spark Plug Cap/Covers [x2] – Hyosung GTR GT GV (Various Models)
£34.99 -
Clutch Lever Cable Adjuster – Various Hyosung Models
£4.99 -
EFi Ignition Coils x2 – Hyosung GV650 GT250 GT250R GT650R GV250 – 2x Aftermarket
£45.99
EXPLORE // RELATED PRODUCTS
-
Genuine Clutch Springs Set [x5] – Hyosung GV250 GT250R GT250
£35.99 -
Uprated Clutch Friction Plates & Drive Overhaul Kit – Hyosung GT250 GV250 GT250R
£75.99 -
Intake Pipe O-RING (Inlet Boot Seals) x2 – GV125 GT125 RX125 GV250 GT250 Hyosung
Price range: £7.99 through £9.99 -
Braided Fuel Line & BIG Filter Kit – Hyosung GT125 GT250 {Carby Models}
£15.99
Independent Shop supplying ride enhancements and quality spares with fast dispatch. Need assistance? Access our workshop guides, manuals, tutorials or drop by the forums for troubleshooting help.
Reviews
There are no reviews yet.