Martin Sorensen
Forum Replies Created
-
Posts
-
Just to make sure.. Is this the right parts then ??!?
Upgrade Regulator Rectifier {Reg Rec} :: EFi Hyosung GV250 GT250R GT250
Upgrade Magneto Alternator Stator Coil :: GT GV 125 250 + RT RX 125
Martin
Hmm.. so, i guess i just have to buy the parts from you then 🙂
Its not that i dont want to, but its just a pain in the bu.. since you are no longer a EU country, and that makes it a whole lot more expensive for me to buy from you.But is that really the reason for it not to start !!, i would think that it would still start even if it wont charge ?!?
I can make that video in the morning, Any special thing we are listening for ?? The bike makes all the normal sounds (fuelpump and idle valve) and then is ready to turn over, but just no start, well starter turns over, just no ignition. Will check spark tomorrow.
At the moment, the gas tank is off, cause i was trying to find this sound that the idle speed control valve is making, but the sound is the same with the one i bought from you.
These are the parts i used when stator blew up, thought that china parts for a china bike would be fine, and they tests out fine when messured at !!
Stator that i put in.
https://www.aliexpress.com/item/1005005887007181.html?spm=a2g0o.order_list.order_list_main.34.3c451802P0YJw7And the regulator i used.
https://www.aliexpress.com/item/1005003874923640.html?spm=a2g0o.order_list.order_list_main.38.3c451802P0YJw7Marcel, sorry to waste your time again.
But.. does the GT650R from 2008, have the same ECU as the 250 ??, Course i might have found a wrecked one here in denmark 🙂Marcel.. Do you have any broken Sentec MCUs floating around, that you just want to toss out ??!
Im an electronics dude, and would like to crack one open, and see if i can do some reverse engineering to maybe replace it with a Microsquirt injection 🙂
Martin
Hey Marcel..
Do you still have ISC solenoids floating around.. Just had the strangest sound from mine, and when i unscrewed it from the filterbox, it came out i 4 pieces 🙂Martin
She is absolutely a keeper 🙂
And she is very tidy, only thing is that the forks are bleeding, but thats to be fixed.
Forum Replies Created
-
Posts
-
Just to make sure.. Is this the right parts then ??!?
Upgrade Regulator Rectifier {Reg Rec} :: EFi Hyosung GV250 GT250R GT250
Upgrade Magneto Alternator Stator Coil :: GT GV 125 250 + RT RX 125
Martin
Hmm.. so, i guess i just have to buy the parts from you then 🙂
Its not that i dont want to, but its just a pain in the bu.. since you are no longer a EU country, and that makes it a whole lot more expensive for me to buy from you.But is that really the reason for it not to start !!, i would think that it would still start even if it wont charge ?!?
I can make that video in the morning, Any special thing we are listening for ?? The bike makes all the normal sounds (fuelpump and idle valve) and then is ready to turn over, but just no start, well starter turns over, just no ignition. Will check spark tomorrow.
At the moment, the gas tank is off, cause i was trying to find this sound that the idle speed control valve is making, but the sound is the same with the one i bought from you.
These are the parts i used when stator blew up, thought that china parts for a china bike would be fine, and they tests out fine when messured at !!
Stator that i put in.
https://www.aliexpress.com/item/1005005887007181.html?spm=a2g0o.order_list.order_list_main.34.3c451802P0YJw7And the regulator i used.
https://www.aliexpress.com/item/1005003874923640.html?spm=a2g0o.order_list.order_list_main.38.3c451802P0YJw7Marcel, sorry to waste your time again.
But.. does the GT650R from 2008, have the same ECU as the 250 ??, Course i might have found a wrecked one here in denmark 🙂Marcel.. Do you have any broken Sentec MCUs floating around, that you just want to toss out ??!
Im an electronics dude, and would like to crack one open, and see if i can do some reverse engineering to maybe replace it with a Microsquirt injection 🙂
Martin
Hey Marcel..
Do you still have ISC solenoids floating around.. Just had the strangest sound from mine, and when i unscrewed it from the filterbox, it came out i 4 pieces 🙂Martin
She is absolutely a keeper 🙂
And she is very tidy, only thing is that the forks are bleeding, but thats to be fixed.