Throttle Position Sensor (TPS) – Hyosung GV125S [Bobber 125 S]
💎 THROTTLE POSITION SENSOR (TPS) | GV125S EFi
Eliminate hesitation and smooth out your daily commute. A new TPS is vital for accurate fuel mapping in your EFi engine. It fixes poor idling and inconsistent power delivery, ensuring your Bobber runs precisely as the factory intended. This is an essential replacement for reliable life on the road.
- ✅ Function: Reads throttle position for accurate fuel delivery.
- ðŸ› ï¸ Reliability: Fixes stalling, rough idle, and jerky throttle feel.
- âš™ï¸ Quality: OEM-spec component (PN: 13580KG7200); tested for accuracy.
- 📦 Note: Requires calibration/adjustment after fitting.
⌚ Allow extra time for delivery please!
Description
A modern EFi motorcycle depends entirely on accurate sensor readings. If your TPS fails, the ECU cannot calculate the correct fuel/air mix, leading to a frustrating ride with hesitation and stalling. Using this high-quality replacement component is essential for performance upgrades and reliable life on the road.
💎 Precision EFi Management
Guarantees smooth operation and ensures your 125S runs exactly as the factory intended.
| Accurate Monitoring Precise throttle body data to ECU. |
Fixes Hesitation Restores consistent power delivery. |
| OEM Dimensions Perfect fit in the throttle body. |
Garage Certified Logic Requires adjustment after fitting. |
📜 Confirmed Fitment Guide
📅 YEARS: All S models from 2019+ onwards
⌠WILL NOT FIT: Older pre-2019 carbureted GV125s, GT125, GT250, or any 300cc models.
While you are working on the throttle body, check the MAP sensor too—they often fail around the same time. View GV125S MAP Sensor here.
🔧 Install Tips
- Disconnect the Battery: This prevents error codes and lets the ECU reset.
- Calibration Needed: This is not just plug-and-play. The sensor needs to be adjusted after fitting—check the service manual for the correct voltage/ohm settings.
📧 NEED GUIDANCE? Email us or visit the HyoRiders Forums for detailed install tutorials and diagnostics help.
Additional information
| Weight | 0.3 kg |
|---|---|
| Dimensions | 6 × 4 × 4 cm |
You must be logged in to post a review.
GARAGE PICKS // ADD TO BUILD
![Oil Drain Plug [CNC Magnetic Sump Bolt] - Hyosung GV125S Injected EFi](https://i0.wp.com/hyoriders.club/wp-content/uploads/2020/04/xgv125sdraincnc.jpg?fit=362%2C362&ssl=1)
EXPLORE // RELATED PRODUCTS
-
Fuel Injector (x1) – Hyosung GV125-S EFi [Bobber 125 S]
£69.99 -
Stator Magneto Bolts x5 – Hyosung GV125-S EFi (Bobber 125 S)
£7.99 -
Anodized Short Gear Shift Bar [Shifter Linkage Rod] – GT125 Naked & GT250 Comet Hyosung
£21.00 -
Engine TDC Inspection Plug (Magnetic Flywheel Viewer Cap) – Hyosung GT125 GT125R GV125
£8.00
Independent Shop supplying ride enhancements and quality spares with fast dispatch. Need assistance? Access our workshop guides, manuals, tutorials or drop by the forums for troubleshooting help.
Reviews
There are no reviews yet.