Forum Replies Created
-
AuthorPosts
-
AleParticipant
AleParticipantY


AleParticipantHey Marcel I use “muc-off” the one for wet weather I do clean and lube at least every week as I use bike every day to go work
Chain and sprockets been fitted 2890 miles ago
If make sense
I’ll send pictures to you soon
Many thanks
AleParticipantThanks for advice i try this Monday and see what happens
AleParticipantHey Marcel how u doing
Just wanted to let you know that I sort out with email problem so we can proceed with this 😁
AleParticipantWel at least I know what to next time thanks u all for advice anyway
AleParticipantI will definitely I will
Should see his face this morning when I show him the video.
Idiot
AleParticipantHi all just find out tha my amazing neighbour do some hole in cable just behind the master cylinder unfortunately I can’t see till I went to Check cameras so I double checked and see it
Thank you all anyway for the advice
Unfortunately the world it’s full of sneaky bastard
AleParticipantHey been here all day nothing change
I got new master cylinder and 2 bottles of fluid still no working i also check the piston on the rear caliper it not stock at all
Even cables as not leak anywhere 😬
AleParticipantOk I will try that one more time and see what happens

AleParticipantBoth tank been ful up past days
AleParticipantYes the front brake works perfectly
Just rear one stop working got new fluid and new pads a month and half ago
AleParticipantRight done this
There not fluid coming out from front brake is that normal?
AleParticipantOk I will try that then
Thanks for the advice bro
AleParticipantwhere I can get a new master cylinder? 😬
AleParticipanthello guys i have the same problem, i tried draining the fluid a couple of times but nothing how can i see if the pump or the pipes are damaged???
AleParticipantI did a couple of tests though I’ll order one now Meanwhile the motorbike is stopped for now Do you know where I could find them?
Feb 21, 2025 at 12:19 PM in reply to: Issue with brake caliper pin – GV125 S EFi (Aquila 125) #18959
AleParticipantHi Marcel, thanks for the advice, it works the pin on the back wasn’t damaged so I was able to unscrew it without problems I had a small problem with the “little screw” when I tried to screw it and the entry hole broke so I tried to redo the thread with a larger one I’ll have to get a new calipter

😐
AleParticipantok thanks for the advice only now I’m a little confused because I had seen this what is the difference?


AleParticipantOk thanks a lot and sorry about it
-
AuthorPosts