Register

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: 2010 GV650 help indetify wires #6042
    Sev
    👤 Member
    🖊 Topic Author
    • Topics: 2
    • Replies: 4

    Thank you very much Ed !

    That eliminated one of the possible problems with my motorcycle.

    I don’t understand why Hyosung would complicate our lives.

    Thank you again!  🙂

    in reply to: 2010 GV650 help indetify wires #6018
    Sev
    👤 Member
    🖊 Topic Author
    • Topics: 2
    • Replies: 4

    It should be somewhere under the tank as you said or towards the front. The wires are short and the connector is at the front end of the harness by the radiator cap

    in reply to: 2010 GV650 help indetify wires #6016
    Sev
    👤 Member
    🖊 Topic Author
    • Topics: 2
    • Replies: 4

    I know,..it is confusing. The coils wires terminals are different and they are connected.

    I looked all over the diagram trying to find were they may be connected, but I can’t find them on the diagram.

    I was hopping someone with a similar bike/year would solve the mystery for me.

    Thank you

    in reply to: 2008 GV650 not running #4670
    Sev
    👤 Member
    🖊 Topic Author
    • Topics: 2
    • Replies: 4

    Hello Simon!

    Thank you for replying!

    I was thinking about this, that’s the reason I got the second carburetor ..

    I think the engine should start/run if I spray starting fluid in the carbs/intake ..but it doesn’t.

    I will clean the carbs again – I don’t have access to an ultrasonic- but I’ll do my best.

    Something tells me that there is something else..last time I rode the bike I heard a ‘clonk’ noise in the gearbox / lower part of the engine just before I returned from my 1 hour glorious riding. The engine was still running after that, but became increasingly harder to start in part because I was playing with the carbs, especially the float height .

    Thank you

Viewing 4 posts - 1 through 4 (of 4 total)