Register

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: Airfilter box question #21166
    Lokutes
    👤 Member
    🖊 Topic Author
    • Topics: 4
    • Replies: 6
    • Country: Germany
    • Bike Model: GV 125 S

    Thanks mate

    Not after more power and also not expecting any, just like the look of it 😉

    Barry

    in reply to: Airfilter box question #21160
    Lokutes
    👤 Member
    🖊 Topic Author
    • Topics: 4
    • Replies: 6
    • Country: Germany
    • Bike Model: GV 125 S

    Hi Marcel

    All the after Stock parts fit both gv300s and gv125s, apparently the same just a different engine.

    I like the look of the gv300s airfilter box that’s why I asked. Looking at pictures of both they look to have very similar fittings.

    You mentioned there’s a newer design? Does it fit the gv125 s? Any pics?

     

    Barry

    in reply to: GV 125 S Valve clearance #20954
    Lokutes
    👤 Member
    🖊 Topic Author
    • Topics: 4
    • Replies: 6
    • Country: Germany
    • Bike Model: GV 125 S

    Hi Marcel

    Both Cylinders sound the same, no chain rattling or any other sounds out of the ordinary.

    What I did was I measured the clearence again, this time I turned the engine a couple of times and measured again and again, Intakes were too big.

    So I changed the shims, again ;), now she sounds right, ticking when cold and hardly audible when warm, so I am going to leave her as she is

     

    Thanks

    Barry

    in reply to: GV 125 S Valve clearance #20946
    Lokutes
    👤 Member
    🖊 Topic Author
    • Topics: 4
    • Replies: 6
    • Country: Germany
    • Bike Model: GV 125 S

    Hi Marcel

    Sorry for the late reply, i finally got round to making a video

    After i did an oil change,  with filter, i noticed the front manifold gasket was not ok, so i had an air leak, new gasket installed

    It definitely sounds like the valves, not so much the front cylinder, the rear cylinder is definitely too loud, annoying when riding as i am sitting right on top of it.

    Have a listen and let me know what you think

    I used the selfie camera so the mic is right on the cylinders,  that’s why the video is mirrored,  and she at Temperature, warm

    Thanks mate

    Barry

    in reply to: British through and through, but live in Germany #20904
    Lokutes
    👤 Member
    🖊 Topic Author
    • Topics: 4
    • Replies: 6
    • Country: Germany
    • Bike Model: GV 125 S

    Hi Marcel

    I am having problems uploading pics, theres no upload button on add media (Desktop)

     

    Thanks

    Barry

    in reply to: GV 125 S Valve clearance #20903
    Lokutes
    👤 Member
    🖊 Topic Author
    • Topics: 4
    • Replies: 6
    • Country: Germany
    • Bike Model: GV 125 S

    Hi Marcel

     

    Thanks for the tips…

    When i pull the clutch the ticking is still there no changes, I rechecked the clearance using new gauges and found the intake to be too big, 0.10 to 0.11.

    I ordered new Shims as I only had 0.05s, got some inbetweens, 0.025s

    I now have 0.07 intake and Exhaust a tight 0.10, when shes cold I hear a faint ticking, which is normal, and warm only Audible at higher Revs.

    Not as loud as before, I popped round to my local Dealer/Garage and he said sounds normal, so I guess its sorted.

     

    I still find it funny that they are audible/louder when warm, normally the ticking should go away?

     

    Thanks

    Barry

Viewing 6 posts - 1 through 6 (of 6 total)