mesaboogie

[mesaboogie]

Hi Marcel

I have just been informed by my bike mechanic that the Inlet manifold you sent me for Gv125cc Cruiser (carby) 2017 is the wrong part ,

He says its very similar but does not fit.

Can you supply another one and give me an address to return the one I have.

Here are the bike details taken from the log book

Reg..MW17[…]

registered 20-06-2017

Type GV125CN

Engine numberGV125-13[…]

Can youget the part ASAP if possible

Cheers

john

[mesaboogie]

trying to remove clutch cover on my 125GV…………. Instructions say

• 1. Go under the bike and tap slightly the “marker”  in the blue circle (LEFT

  • 2. Once the cover , splits –  Go to the TOP of the clutch cover.
    3. Near the oil cooler pipes , put the screwdriver or a blunt steel knife to twitch the cover (towards you)
    4. Now, we have some movement…
    5.  Remove the clutch cover!
    🔥 WARNING = The “gasket” must be removed and replaced with a new one. Regardless.

   

  PICTURE)

  Can anyone tell  me just where this is?…..under the bike?

  Thanks all!!

 

1. Go under the bike and tap slightly the “marker”  in the blue circle (LEFT

• 2. Once the cover , splits –  Go to the TOP of the clutch cover.
  3. Near the oil cooler pipes , put the screwdriver or a blunt steel knife to twitch the cover (towards you)
  4. Now, we have some movement…
  5.  Remove the clutch cover!
  🔥 WARNING = The “gasket” must be removed and replaced with a new one. Regardless.

 

PICTURE)

Can anyone tell  me just where this is?…..under the bike?

Thanks all!!

2. Once the cover , splits –  Go to the TOP of the clutch cover.
3. Near the oil cooler pipes , put the screwdriver or a blunt steel knife to twitch the cover (towards you)
4. Now, we have some movement…
5.  Remove the clutch cover!
🔥 WARNING = The “gasket” must be removed and replaced with a new one. Regardless.

[mesaboogie]

Hi Marcel

Much appreciate your input, thanks for all your help and will get the clutch checked out  ASAP.

john

[mesaboogie]

New Member joined 29th August 2018 …….Pittenweem, Fife

[mesaboogie]

Hi Deano

Much in the same position as yourself, just joined,and living in Fife, Pittenweem to be exact, just thought I’d say HI

[Author]

Posts