Graham Walker
Forum Replies Created
-
Posts
-
Managed to get the pistons out and used the reverse bleeding syringe to pump the brake fluid from brake bleeding nipple back up to the reservoir. Now all good.
`thsnks for your information , sorry not efi model . it’s a 2005 year.
Had the same issue, however seller told me it had your issue. Marcel resolved my issues, basically remove carburettors and clean thoughly with card cleaner and fine wire to ensure all carburettor orifices are not blocked. Un plug EGR Valves and blank off including suction pipe from manifold. I was still loosing power at full throttle up hill so was advised to move the needle circlip from 3rd grove to 5th. Now running perfect 70mph no problems.
Thanks for your reply, I’ve removed the complete system, no electrical connections. Bike running perfect now after full carburettor strip and clean.😊
