Register
FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 6 reply threads
  • Author
    Posts
    • #12029

      Hi guys i have a 2007 gv125 and the engine dies when the throttle is applied. Any suggestions on a fix or cause please? I’m not mechanicals minded and have no idea lol

    • #12030
      Simon
      Participant

      It’s going to be jets in the carb blocked up with something

    • #12031
      ♠️ M77
      Keymaster

      As per simon 👍

      Can add any history and things that have been done to bike to make it behave less than factory standard or any mods that would affect its running behavior ?  Year ? total miles?

    • #12032

      As per simon 👍 Can add any history and things that have been done to bike to make it behave less than factory standard or any mods that would affect its running behavior ? Year ? total miles?

      I don’t think anything has been done orher than maintenance. I have only owned for a week. Its 2007 and about 50000 miles

    • #12033

      Although I did try to fit a usb charging port so I don’t know if that could have caused an issue

    • #12040
      ♠️ M77
      Keymaster

      Take a look at the tutorial section of this forum, find the 2x topics that discuss removing the airbox and inlet manifolds.  Once you read all that , is this something you can do at home ?

      Then we can either see if its good for you to self-clean the carbs , check jet sizes , etc  or  if its best a local mechanic can ultrasonic clean them for you, then you fit new jets etc

      Also, this topic is a very good read below:

      GV125C Tuning frustration

      And this one too

      MOT Day and running issues

      Happy new years ahead and enjoy your present holiday break!

    • #12053
      Graham Walker
      Participant

      Had the same issue, however seller told me it had your issue. Marcel resolved my issues, basically remove carburettors and clean thoughly with card cleaner and fine wire to ensure all carburettor orifices are not blocked. Un plug EGR Valves and blank off including suction pipe from manifold. I was still loosing power at full throttle up hill so was advised to move the needle circlip from 3rd grove to 5th. Now running perfect 70mph no problems.

Viewing 6 reply threads
  • You cannot reply to this topic.