Register

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: 2007 GT125R #9631
    Shaun
    👤 Member
    🖊 Topic Author
    • Topics: 1
    • Replies: 6

    in reply to: 2007 GT125R #9629
    Shaun
    👤 Member
    🖊 Topic Author
    • Topics: 1
    • Replies: 6

    thanks. Yep all fishy things now so brakes, bulbs, repaint. Will be upgrading sprockets with your ones end of month then all the advisory’s from the last owners MOT. Good to know about the cables and yes dash is unwanted. As frustrating as the journey is I’m really enjoying working on this bike. I’ve never had to do such work on a bike before so great learning experience

    in reply to: Crank but no start, ecu? – GV250 2012 EFi #9619
    Shaun
    👤 Member
    • Topics: 1
    • Replies: 6

    Have you had the carb off at any point?

    in reply to: 2007 GT125R #9617
    Shaun
    👤 Member
    🖊 Topic Author
    • Topics: 1
    • Replies: 6

    Update time..

    ITS ALIVE!!!!!!

    So after a lot of help on the Facebook group here is an update.

    upgraded vacuum lines bought from here, changed the fuel filter and all fuel lines for new. Installed a clutch switch. Cleaned the carbs only issue both choke plungers work however the bar does not slide operating the other as it appears to be seized in place. Managed to get the bike to start but was idling ridiculously high. Opted to install the carbs to the airbox then install to the manifolds. This made a huge difference. Bike now idles at 3k rpm. if i slight touch the throttle assembly at the carb it reduces ad stays there. Opened up the cable housing and the grip is all broken except one hole. I think this may be the culprit and will replace and replace the grip. Had to put a splash if fuel into the carbs to get her to fire unfortunately the battery would die before would fire. Halford wants £72.99 for the battery cheaper and same model on ebay for half the price..

     

    Also deleted the EGR thanks to the tutorial on here. Then another problem reared its ugly head…the petcock was leaking. This will be replaced but for now JB weld saved the day with a temp fix. So left to do is as follows repaint all fairings i have a theme in mind all will be revealed when completed. Purchase a left side fairing bracket as the other is all twisted. Replace the petcock, then oil filter change just for peace of mind. Noticed today exhaust bracket is held on with cable tie. Wanted to upgrade exhaust anyway now i have an excuse. Then i need to adjust the drive chain as loose. Also finally got the dash sorted mine had burnt out. Ordered one on eBay which was a nightmare no tracking 10 days later not arrived and no refund in site. Had to get eBay to sort. Then miraculously a post on Facebook £30 later new dash which works.

    I did take it for a ride to the end of the road forgot how heavy the bike is to push out my gate lol

    in reply to: 2007 GT125R #9562
    Shaun
    👤 Member
    🖊 Topic Author
    • Topics: 1
    • Replies: 6

    Well I just keep finding new things lol. Still waiting on the das guy on eBay hasn’t provided tracking details been over a week getting frustrated now. Wiring loom repaired and engine cranks. Don’t think fuel is now getting through so checking for vacuum leaks…. Will be cleaning carbs tomorrow I had it started before so I know does run. Sparks are good coils are good. I will not be defeated lol

    in reply to: 2007 GT125R #9542
    Shaun
    👤 Member
    🖊 Topic Author
    • Topics: 1
    • Replies: 6

    Hi thanks a lot,

     

    spent the evening fixing the wiring loom. Discovered they bypassed the clutch switch the bullets were seriously corroded have ordered a new switch from yourself. Solenoid on way along with new display this bike will be back in the road running just needs some love. I do like the bike and will be using it as a run around despite having my full licence couldn’t resist this when saw it.

Viewing 6 posts - 1 through 6 (of 6 total)