PaulGT250r

[PaulGT250r]

Good news, all fixed.
Fitted new headlight relay and Switch assembly on RH handlebar, lights work and park light also working.
Thanks for all your help, great to have it all sorted.
Cheers
Paul

[PaulGT250r]

Update from today.
Removed the front headlight and fairing.
Fount the wiring for the 2 pin plug is looped in with the headlight wiring.
Checked all the bulbs, all good.
Tested for power at the 3 pin plug to the headlight 3 yellow wires, non of them were live or had power, also checked with the bike running.
Headlight relay was no good so swapped it out and rechecked, still no power and headlight not working, high beam does work using the pass button on the left handle bar.
Checked and cleaned the switch on the right handle bar.
Could the issue be the ECU?
Tail light and rear brake light works with front and rear brakes.
Any suggestions?
Thanks

[PaulGT250r]

I have uploaded a video on YouTube, link below.
I also found a wiring diagram for the bike, from what I can see there in nothing to plug into either of the 2 plugs I have.
Wiring diagram is at the end of the video.
Hope this is helpful for you.

Thanks
Paul

[PaulGT250r]

I cannot work out how to attach the photos.
I click on Visual, Insert/edit media, it then comes up with Source.
Do you have an email address I can send the photos to?
Thanks
Paul

[PaulGT250r]

Thanks Simon for the info.
On the air box there is a sensor with a 4 pin connector that has 2 pipes coming out of it, what connects to it?
Any photos would be helpful.
Thanks
Paul

[Author]

Posts