Cihan
Forum Replies Created
-
Posts
-
https://a.aliexpress.com/_EzdEUef ets original one. You mean this π
I am aliexpress s good customer. Diamond level. Belive me all ets sensors are same. Same ets has in there but this one is more good than orijinal. If i was rich, i would buy from wholesale. They are really kissing customers by their prices.
https://a.aliexpress.com/_EwmpK0j
Ets sensor
https://a.aliexpress.com/_EGA5Gg7
ignation coil π
From aliexpress o2 synsors are working well. There is no needed buy from Hyosung wholesale site. Jacks are same, o2 sysnsors hex diametersΓΆare same. Cap color is purple. All purple color caps o2 sysnsors fited their place.
Noooo this way is jurk bro. If you want put battery 1 year like that, nothing happening. I found factory’s way for reseting ecu. In 2 seconds on and off ingation 5 times. Gear N possition, red switch On possition and on of, on off, on off, on off, on off. x5 times in 2 seconds. I did it and Yesssssss. It done. But may be 10 15 20 times Δ± tired. But at the end it has done.
Yes yes, i checked bro. Between 13.3 and 14v. My bike at 52.000km need new 2 sensors. From aliexpress i gave an order. Hyosungwholesale bastards selling very expensive. Many parts of this bike really cheap in aliexpress. 1/3 less price from hyosungwholesale web site. Those bastards are really very clever. But i found more cheaper
Jdiag brand s intel can read this fckng branda ecu and can programable this ecu. Normal, simple obd2 intels are nothing.
Thank you mate. I learned Hyosung ecu is delphi system and thats why with obd2 normal systems intel, impossible π only delphi obd2 system can diagnose this fckn brand s ecu. And there is no need to 4 pin use k-line, +12v and ground that we use. Other 1 pin is for updating ecu
Thank you mate. I learned Hyosung ecu is delphi system and thats why with obd2 normal systems intel, impossible π only delphi obd2 system can diagnose this fckn brand s ecu. And there is no need to 4 pin use k-line, +12v and ground that we use. Other 1 pin is for updating ecu
Bro hi. I measure voltage. Battery 12.7v when engine off, when bike works 14.3v 14.5v. π but this fckn sensors problem π
Everything is perfect with my bike(starting, driving, sound) just f1 light my problem. Why it is lighting?
By the way, today i measure o2 sensors sockets voltage.
Female ecu side ( -,-,-,- )
outside (-,,-) 2 pin 14.3v,
inside (,-,-,) volt 4.3vThank you again bro. I reseted ecu. It was soo easy. In a 2 seconds, i made on of key 5 times and ecu reseted. Since 3 days i am geting just o2 sensor 1 high voltage, o2 sensor 2 high voltage. Bike is super. Everything is super but f1 light is lighting but there is no problem on driving. Is this f1 ignore important or never mind? And how can i solve this problem?
Thank you bro but i saw on youtube ms 309, ms 309 pro obd2 we can scan Hyosung gv 250 ecu. And just elmm327 again i saw it perfectly scan with gv 250. But i dont know gv 250 s ecu 4 pin socket diagram. If i would, i would connectΓΆto elm 327 with manually. Do someone know 4 pins diagram for elm 327?
