Ron

[Ron]

Thanks for the info, carb was removed cleaned, reassembled, and placed back on the bike,one of the hex head screws on the rubber boot was easily stripped out, it took some time getting the screw out but after about 1 hour I got it off. Removing the intake rubber boots made it much easier, by fitting the carb to the air box first then sliding the boots under the carb made it work much better.

[Ron]

I have a 2002 GV250 I managed to get the carb off the bike after a lot of yanking, pulling, and twisting. Now it is time to re-install the carb on the bike, any suggestions on how to get it back on the bike given the very small space to work?

[Author]

Posts