Dave

[Dave]

Where can I get a front master cylinder rebuild kit if they do one thanks.

[Dave]

So that’s OK for the pipes you have for sale on ebay.

[Dave]

Hi its says 1/2 on the back of the cylinder.

[Dave]

Thanks to Marcel and Simon.  After fitting upgraded stator & flywheel, coils and rectifier bike running better than ever uprated sprockets makes a world of difference 😀 👍.

[Dave]

Thanks I’ll look for one.

[Dave]

Ok will do thanks.

[Dave]

Hopefully new stator will sort it .

[Dave]

1.1ohms on all 3 yellow
112 ohms blue to green neg to blue pos to green.
131 ohmes green pos blue neg is this correct. As ive just ordered a upgrade stator from you and don’t want to waste money. Thanks

[Dave]

Needle at zero. Clutch switch bypassed. Side stand bypassed. Tested pickup coil and readings were blue wire 0.4 should be 0.6-0.9 ohm.
Green wire readings were 131.6 ohms and should be 90-110 ohms. Do you think this is the problem.

[Dave]

Is there any motorcycle electricians neer bradford as i dont have a clue why my bikes not sparking . Side stand stand switch . Clutch switch . Neutral switch all seem to be working. charging phases seem to be ok as ive done test i saw on youtube.dont no how to test rectifier. Ignition relay seems to be letting juice through please 🙏 anyone help.

[Dave]

Hi I’ve turned front sprocket around so on the correct way. I’ve tested clutch, sidestand and kill swith all work as they should. How do I check my stator . Thanks

[Dave]

Hi sorry I can’t seem to put a picture on. Sprocket with smooth side facing away from the engine. I did use impact driver with no chain when removing Sprocket  could that have moved something. It turns over fine just no spark.

[Author]

Posts