Cristián Jonas Aguilar

[Cristián Jonas Aguilar]

Hi,

Today I have scanned the bike. Just old DTCs of the lambdas voltage and injector 1 & 2 failure. I guess that the injector failures were during service at the shop. The technician told me that one of the injectors has rust in it (the gas tank has some rust). He only changed the spark plugs and caps, and cleaned the injectors.
I cleared the DTCs and keep the bike at idle for almost ten minutes with no failure at all with te temp reaching 110-120 C.

Later I will go for a ride and update this post.

Regards,

 

Cristian

[Cristián Jonas Aguilar]

Thank you very much Joseb,

As I can see you have in your description a Kline + and a Kline -, but in the diagrams in the web site there’s only three wires, two for power and one for Kline.

Also it’s hard for me to identify the pin one on the connector from my bike. Could you tell me te colors of the cables from the bike? My bike has an MT05 DELPHIE ECU.

Regards,

Cristian

PD: the bike is at the service shop right now, and they tell me that an injector is suspicious. But I’m not sure if an injector can fail under temperature, and I can’t find the original injector in my country…

 

 

 

 

[Cristián Jonas Aguilar]

Hi,

I’m having the same problem with my Hyosung Gt250R (DELPHI ECU).
Could you send me photos of the cable you made? My email is  [admin redacted]

Thanks in advance,

Cristian

[Author]

Posts