Register
#9158
joeseb farrugia
šŸ‘¤ Member
šŸ–Š Topic Author
  • Topics: 3
  • Replies: 24
  • Country: Malta
  • Bike Model: GT250 D spec EFI 2013

Under the tank on the left hand side are 2 connector blocks I’m pretty certain you have a bad connection there, just need a clean them & it should be fine, I had the same issue tried everything then realised that one of those connectors is where the ecu gets the signal from the coil to set the idle control solinode to the right position not had the issue again.

Under the tank, on the left hand side there are 2 connectors one of which is certainly the connector for an O2 sensor (second Photo). A bit further back (first photo)under the front seat there are at least 4 white, “cheap”, connectors one of which seems to be coming from the charging coil area. Are you perhaps referring to the latter group?