Reply To: Gt650r 2008
Next time…
Do this. Key on and off three times within 2 seconds.
Then it will blink. Count the blinks. It is the ECU tell you a fault code.
Eg.
10 blinks(pause)2 blinks(pause)10blinks(pause) 1 blink
Equals 10 – 2 – 10 – 1
Translates to Injector at cylinder #1 for example.
Further instructions are in every service manual i have uploaded on this site for 650s. Example, it will explain how to get injector #1 running.
Somtimes it will also blink
10 8 5 2 10
10 8 5 2 10
Example = Neutral sensor , Clutch Switch (no bypassing) , side stand (bypass yes) OR the rider is NOT holding clutch in before pressing start.
Regards