Register

Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • in reply to: Looking for replacement bearing #10803
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    Might go as what you recommend sir,
    Since the slip say the original color of the bike is blackΒ πŸ˜›

    Before I send you an email sir, lets us gather any bearings involve on the bike
    This is as far as I know:

    * Steering stem
    * Swingarm
    * Linkage
    * Wheels
    * Sprocket hub

    Anything that I’m missing sir?

    in reply to: Looking for replacement bearing #10797
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    If possible, all of’em sir
    I have this shell that I’m planning on sending for powder coat
    So might as well replacing all of the bearings & seals

    in reply to: Looking for replacement bearing #10765
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    Sorry for that,
    My 07 GT250R
    Found wheels & sprocket hub bearing on the shop here,
    But looking for the other 2 also

    in reply to: Bike won’t start/crank #10713
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    What is ‘HT caps’ sir?

    Just trying to crank my bike again
    & the battery is dead
    Deos the mean I have stator problem now?

    I’ve taken out my CDI unit & put it in my friend’s bike
    it 1 kick start
    so I’m safe in CDI?

    in reply to: Bike won’t start/crank #10709
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    No sir,
    dash light remain the same & no sound at all

    I’ve borrowed solenoid from a friend,
    & it cranked by pulling in the clutch

    in reply to: Bike won’t start/crank #10703
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    I finally got it “cranked” sir but through different method

    what you thought me above, I’ve did it
    the only difference I get when pulling the clutch, the headlight went dime
    no “crank”

    other method is from a friend
    told me to “jump” the starter solenoid head,
    & it did “crank”

    Does that mean I have bad starter relay solenoid?

    in reply to: Bike won’t start/crank #10700
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    can you give a direction on how to do it sir?

    if the clucth doesn’t work, it won’t go into gears right?
    cause mine can move between gears

    I’m not a mechanic/electrician
    but will to do it if there a guidance where to look for/at

    in reply to: Bike won’t start/crank #10696
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    * no buzzing/ticking
    * its a GT250R carb so won’t have fuel pump
    * dash remains the same, no reaction

    in reply to: Bike won’t start/crank #10687
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    checked the fuse its fine, there only 1 right?

    & if the fuse blown, will the bike turn on?

    cause my did, just won’t crank/start

    in reply to: Keep stock tyre size or upgrade? #10646
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    Is it better upgrading than the stock size?

    Will it not compensate the driving or mobility of the bike?

    in reply to: I’m new here & to this bike brand #8997
    Azri Jaffry
    πŸ‘€ Member
    πŸ–Š Topic Author
    • Topics: 9
    • Replies: 11

    Here we use Shell RON97 & we have a new the V-Power, am I safe in fuel?

    Do you mean site like this sir? cause I’ve seen a lot of them with white & blue context.

    Do you know a site that can be trusted or you can be our dealer yourself sir, if we want something?

    In terms of finding a wreck/salvage/scrap yard, I’ll try me best cause its hardly to find now in our country.

Viewing 11 posts - 1 through 11 (of 11 total)