#4992
Alan McLean
Member
  • Topics: 8
  • Replies: 56
Joined:
Jul 21, 2020
@macker
Orihuela Spain
Aquila GV125

Hi Marcel, I have discovered what the problem was with the bike revving to 6k, the linkage between the two carbs was being fouled by one of the clips on the intake manifold. However after sorting that out I took the bike for a quick ride and was very disappointed, the bike reels exactly the same before doing all the upgrades, new main jets, new coils and plugs etc. The bike feels dead in the lower rev range very little power until the revs get up to about 5000, this is how it was performing prior to changing anything.

Any ideas or suggestions?

Skip to toolbar