Forums 🚥 PiT STOP 🔧 Hyosung Technical Help EXIV250R/GD250R slow crank |Fixing 10 Year Old Factory Mistake Reply To: EXIV250R/GD250R slow crank |Fixing 10 Year Old Factory Mistake
Quoting your previous post
”
Hi! New to the group after buying/selling hundred of bikes over the years a Hyosung has eventually ended up on my lift.
2017 GD250R/EXIV 250r only 400 miles has not been started in about a year.
First thing I replaced on it was the battery. It cranks slow. Have tested and tried a handful of known good batteries so it is 100% not a battery issue.
have checked nothing else, I will start with frame/engine grounds, starter solenoid and then starter.
any input from other owners? I just want to acknowledge how cool it is this seems to be an active forum. Almost all bike groups have moved to Facebook at this point and I don’t think it’s for the better.”
=========
Have you considered removing the flywheel to check the condition of the sprag clutch ?
But looks like you fixed it though , gotta love electrics! – Apply some ACF50 and clean wires, incase of oxidization after all the years , did the owner ever ride through a bad storm ?