Forums 🚥 PiT STOP 🔧 Hyosung Technical Help Where do these wires go? One attached to coil & one in the battery area GT125R
- This topic has 7 replies, 2 voices, and was last updated 1 week ago by ♠️ MARCEL.
-
AuthorPosts
-
-
Sep 26, 2024 at 12:36 PM #14948
-
Sep 26, 2024 at 12:36 PM #14949
-
Sep 26, 2024 at 2:36 PM #14950
I have no idea where these wires go, can someone please help? Would they cause the bike not to run? GT125r 2007 thank you
-
Sep 26, 2024 at 4:53 PM #14951
Cut the yellow box off, that’s very suspicious!
The “Black & White stripe” of your wire from the harness goes to “Battery Terminal Negative”
Then it splits UP to also have an extra wire going down to the CLUTCH COVER (to give ground for your spark plugs and starter motor)// Meditation doesn't mean you have to sit still....
-
Sep 27, 2024 at 9:45 AM #14966
Do you have a picture of where the other wire connects to the clutch cover please?
-
Sep 27, 2024 at 9:11 PM #14973
Okay, three things.
The yellow box is going to the ground where the coil is.
What COLOURS are the “harness” wires from the white 2-pin connector #? (the female side) = I will advise what that female connector is for.And here is a recently sold cable for the “Y shape” (“clutch cover, main harness & battery = at once)
https://www.ebay.co.uk/itm/255169683992
We sold out on that cable, but if you need it , send us a sales email and I will check my workshop after the 30th , as currently moving places. Or try another ebay seller if in a mega rush
// Meditation doesn't mean you have to sit still....
-
-
AuthorPosts
- You must be logged in to reply to this topic.