What is this??

[Sid]

[♠️ M77]

No where that exists on any carb 125 GTR – I’ve fixed too many of them to know this.

Where did it come from ? and what did it connect to ?

What year is even the bike ?  (or confirm does it use an older dashboard that has “GREEN LCD” + “BLACK REV RPM GAUGE”  ?

[Sid]

Hi sorry for the late reply I’ve just seen your post

The bike is a 2010 with green led and yes a black rev

The wire is connected to both earth’s on the coils ,someone said and I cannot remember where that he has it on his gt250 but has no idea what it does,

[♠️ M77]

Sid wrote:

Hi sorry for the late reply I’ve just seen your post The bike is a 2010 with green led and yes a black rev The wire is connected to both earth’s on the coils ,someone said and I cannot remember where that he has it on his gt250 but has no idea what it does,

Quote

if you get free time too take her apart very slowly , find out along the harness where the plug is supposed to go , i am sure “very few” hyo looms did have something like that to be fair, it might be called “igniter” by hyosung or used as some mystery relay for the horn , but check the harness ,  peel the tape  and re-wrap it with quality black electrical harness tape again.

[Sid]

Hi

I found where this wire plugs  into and it is part of the harness. And I guess the Yellow end go’s to earth But what it does I have no idea The diod reads 240v AC With 2 one way  resistors.

[♠️ M77]

Could be for the horn or front coil = Honestly i’ve dug through diagrams i kept , Hyosung never sells that particular part for a 125 anyways, so it must be part of the harness as i can confirm  2x other looms i have of 2007 bikes have it too.    I will call it a “mystery part” lol

[Author]

Posts

[Sid]

[♠️ M77]

No where that exists on any carb 125 GTR – I’ve fixed too many of them to know this.

Where did it come from ? and what did it connect to ?

What year is even the bike ?  (or confirm does it use an older dashboard that has “GREEN LCD” + “BLACK REV RPM GAUGE”  ?

[Sid]

Hi sorry for the late reply I’ve just seen your post

The bike is a 2010 with green led and yes a black rev

The wire is connected to both earth’s on the coils ,someone said and I cannot remember where that he has it on his gt250 but has no idea what it does,

[♠️ M77]

Sid wrote:

Hi sorry for the late reply I’ve just seen your post The bike is a 2010 with green led and yes a black rev The wire is connected to both earth’s on the coils ,someone said and I cannot remember where that he has it on his gt250 but has no idea what it does,

Quote

if you get free time too take her apart very slowly , find out along the harness where the plug is supposed to go , i am sure “very few” hyo looms did have something like that to be fair, it might be called “igniter” by hyosung or used as some mystery relay for the horn , but check the harness ,  peel the tape  and re-wrap it with quality black electrical harness tape again.

[Sid]

Hi

I found where this wire plugs  into and it is part of the harness. And I guess the Yellow end go’s to earth But what it does I have no idea The diod reads 240v AC With 2 one way  resistors.

[♠️ M77]

Could be for the horn or front coil = Honestly i’ve dug through diagrams i kept , Hyosung never sells that particular part for a 125 anyways, so it must be part of the harness as i can confirm  2x other looms i have of 2007 bikes have it too.    I will call it a “mystery part” lol

[Author]

Posts