Register
FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 1 reply thread
  • Author
    Posts
    • #19523
      Geert
      Participant

      I am looking for an upgrade for my bobber to go lower in revs and have the same speed and also a better sound. Who has some advice here?

      aim from Belgium

       

    • #19525
      ♠️ M77
      Keymaster

      520 Chain Kit & Clutch Upgrade.

      The 520 kit is one of the best life changing mods for the GV125-S  ,  every customer i know did not go back to stock 428 skinny chains & tiny sprockets.

      Clutch = It just compliments the 520 upgrade, your clutch will have a bit more punch 👍

      Exhaust = Get a garage to cut yours and weld a 51mm cone ===> Get / Find a full size  51mm exhaust muffler that you like

      but remember All GV125 including 2001 models all the way to 2025 models will run SLOWER if you do not keep DB-Killer inside.  It is because GV pipes are too short compared to  Hyosung GT bikes, the GV models I tested  (both carby and EFi) always hated it when I installed very small exhaust cans

      Yes the noise is good , but the performance was rubbish.    I used OEM exhaust and drilled a bigger hole for nice sound and the other bike I used OEM Harley 2022 exhaust pipes as a custom job.

      Chinese cans from China = I did not care to try , they look like they will rust in 2 winters and look poorly made.  The EU where we live is very salty and wet , especially UK!

      If you want a good example of an exhaust that does not make your bike slow ==> Look at LEOVINCE Exhausts for GV125 and GV250 , then ask your mechanic to see if he can do something like that.

      Whatever exhaust you have , make sure it is long enough to reach the chain adjuster

Viewing 1 reply thread
  • You cannot reply to this topic.