Tail light
Any future maintenance tips, technical news, or occasional short tutorials will be posted directly on our official blog here.
- This topic has 10 replies, 3 voices, and was last updated 2 years, 7 months ago by
.
-
Posts
-
-
-
-
-
-
I can see the wire to the tail bulb but cant get it out, seems like it’s jammed inside. Do I just pull harder? Cheers
Is it a “single bulb” or do you have LED OEM Rear light ?
(Korea changed lights in 2009-2012 onwards for GT bikes to have factory red LED’s at the back.If it is a bulb type (older shape model Hyosung) = You can try what Simon said! (use a little bit of contact cleaner around the bulb and socket to free it off a little bit and be gentle.
-
-
-
-
-
The brake light is still working. Do you reckon I should check the wires and fuses first?
If you see red lights = the unit is working , it could be your RELAY because newer generation Hyosungs uses RELAYS to control the front and rear lights
(Click this link to see it)You will find this relay located on the LEFT REAR COVER of the pillion seat.
Maybe clean the contacts and check wires ? If nothing, it could be the relay or there is a “break” in the wire along somewhere at the back that is stopping the voltage signal going to the Red LED’s at the back.
The “Brakes” will trigger the LED, independently. The brakes use their own switch attached to the master cylinders.
-
-
- You cannot reply to this topic.
Any future maintenance tips, technical news, or occasional short tutorials will be posted directly on our official blog here.
- This topic has 10 replies, 3 voices, and was last updated 2 years, 7 months ago by .
-
Posts
-
-
-
-
-
-
I can see the wire to the tail bulb but cant get it out, seems like it’s jammed inside. Do I just pull harder? Cheers
Is it a “single bulb” or do you have LED OEM Rear light ?
(Korea changed lights in 2009-2012 onwards for GT bikes to have factory red LED’s at the back.If it is a bulb type (older shape model Hyosung) = You can try what Simon said! (use a little bit of contact cleaner around the bulb and socket to free it off a little bit and be gentle.
-
-
-
-
-
The brake light is still working. Do you reckon I should check the wires and fuses first?
If you see red lights = the unit is working , it could be your RELAY because newer generation Hyosungs uses RELAYS to control the front and rear lights
(Click this link to see it)You will find this relay located on the LEFT REAR COVER of the pillion seat.
Maybe clean the contacts and check wires ? If nothing, it could be the relay or there is a “break” in the wire along somewhere at the back that is stopping the voltage signal going to the Red LED’s at the back.
The “Brakes” will trigger the LED, independently. The brakes use their own switch attached to the master cylinders.
-
-
- You cannot reply to this topic.