Register
FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 2 reply threads
  • Author
    Posts
    • #19889
      Steffen
      Participant

      Hey! My speedometer after being taken off, and put back got some issues..

       

      Tacho works! But the speed doesn’t change it keep saying 0, and my temp/fuel bars keep rising around every 10 second till the bars hit max. I think this means “no signal”, but all contacts are plugged in, all oem connectors to the speedometer is correct, also the 3 circular contacts on the back of it is correct.

       

      Issue still persists… ideas?

    • #19891
      Steffen
      Participant
    • #19894
      ♠️ M77
      Keymaster

      For temp sensor , check the “brown wire” under the dash = use a meter to make sure the wire is not broken along the harness.

      For Speed = Signal comes directly from speed sensor on the fork leg,  so put your front wheel in the air , spin the wheel fast and see if it comes on?
      Or
      Remove the plug for speed sensor , check connections and clean contacts.     Check the wire colour for speed sensor going to dashboard blue socket,  use a meter to verify there is no breaks along the harness (signal loss?)   or try another speed sensor.

      Fuel Gauge =  If you have fuel , the bars will go up yes.

      Does “Turn Left,  Turn Right,  Neutral , High-Beam” work ?

Viewing 2 reply threads
  • You cannot reply to this topic.