Side stand switch – Gt250
- This topic has 3 replies, 2 voices, and was last updated 1 month ago by
.
-
Posts
-
-
I everyone, my huysong 250 engine runs well in neutral. But as soon as i put it in gear the engine dies immediately. I checked the side stand sensor and found that its been removed and only the connection wires is there. How can i bypass this please i will appreciate the help
-
Yes bypass it.
Also check clutch switch on the handle bar, if it is faulty , it will shut off engine once in gear (don’t bypass) find another common bike in your country’s junk yard, that uses similar switch as Hyosung.
// Meditation doesn't mean you have to sit still....
-
Yes bypass it.
Also check clutch switch on the handle bar, if it is faulty , it will shut off engine once in gear (don’t bypass) find another common bike in your country’s junk yard, that uses similar switch as Hyosung.
Hi Marcel, can you please advise me how to do it
-
Side Stand switch bypass = Get electrical tape , cut the wires under the kickstand going to the stand switch ==> now join the 2 wires from the harness going up to the front tyre , and use lots of tape to waterproof it and avoid any arc’s or electric sparks/shorts.
Side stand is bypassed.
Let us know if it worked.
Clutch switch = Plug will be under the airbox near the left side of the frame , find a similar bike that uses the same clutch switch as hyosung , even an old Honda machine , or go to bike garage with your old switch , ask them to order you a similar switch for the clutch lever.
If you remove the clutch switch, check wires for rust and use contact cleaner product (it may be called a different name in your country)
// Meditation doesn't mean you have to sit still....
-
Gt250 gomoto
- You must be logged in to reply to this topic.