Rear Brake Lever – 2007 SF-50 Prima Rally
- This topic has 4 replies, 2 voices, and was last updated 8 months ago by
.
-
Posts
-
-
Bike Model = : 2007 SF-50 Prima Rally
<hr />
I managed to break the lever on the scooter. I ordered a replacement from Hyosung and the one they sent was half the size of the one I need and despite sending them a picture of the two side by side they can’t seem to help me.
Looking for suggestions, thanks
-
-
Hello,
Although Hyosung kept asking for a part number, they never took the time to figure out what I needed even if they no longer produced it.
A few hours after this post, by fluke, I came upon a picture of the lever showing two different suppliers. If you search 57600HG5800 you will find what I came up with.
I have ordered one and hope it arrives and does the job.
Unfortunately I can’t post a picture as for some reason the icon to do so does not appear for me on the site. An administrator was going to look into the problem but so far it is still a no show.
I’m new to the site but possibly someone who knows how can create a tech note about the part for others. If the part arrives and is a correct replacement, I will update this post.
-
Today I finally received the brake lever I ordered and it is a correct fit for the old one. I did have to force the mounting bolt as the hole in the new lever was slightly out of position. I also put a bit of white grease on the bolt and lever to allow it to operate smoothly.
If someone needs one of these levers, search the part number listed earlier and a couple of sources pop up. I used Hyosung Parts. The shipped quickly. The long delay before I got it was due to Canada Customs processing time.
-
Today I finally received the brake lever I ordered and it is a correct fit for the old one. I did have to force the mounting bolt as the hole in the new lever was slightly out of position. I also put a bit of white grease on the bolt and lever to allow it to operate smoothly.
If someone needs one of these levers, search the part number listed earlier and a couple of sources pop up. I used Hyosung Parts. The shipped quickly. The long delay before I got it was due to Canada Customs processing time.
Thanks for the update , it should help future owners who may get these rarer primas
keep yours alive & have fun now!
-
- You must be logged in to reply to this topic.