GD250 – Cutting out while running
- This topic has 3 replies, 3 voices, and was last updated 3 years ago by
.
-
Posts
-
-
-
Hey welcome.
Do you think you have either instgram , youtube, or vimeo or any other public site that lets you upload a video and copy it.
Come back to the forum and just share the link to it.
This way we can see & hear what’s happening to the bike.We may go back & forth to get you the right answer , so i will start with the basics….
- What year is the bike?
- Do you use e5 or e10 fuel (or what does the pump say on your petrol station forecourts) ?
(Here in UK we discourage the use e10 even if the bike is rated for it, due to the fact bike simply runs better on e5 premium fuel & less maintenance of the fuel system to worry about later) - Do you or have you used any products such as “WYNNS GOLD PETROL SYSTEM” cleaner, which you fill up in the tank (all of the bottle) and mix with half tank of normal fuel. This will “try” to soft clean your injectors, pump, etc
- Do you get any Fi warning lights on the dash ? (or maybe we will see it from a video?)
- Has the bike been modified in anyway ?
- Lastly, if you have the physical service manual with you, can you go to a page that talks about getting error codes to display
Usually error codes displayed on the dash (when you follow the manual) , can sometimes tell you exactly which part is acting funny to need attention or a replacement.
-
Hello , i have same bike and same problem my gd 250r is a 2017 model i swapped the baterry and it run well for almost a year now its the same cuts out unexpected. I´m wondering if its a fuel pump issue…
Clean the injectors and look at the fuel pump for any clogged debris or replace it, as sometimes it happens.
Also , check service manual and try to get Error Code from Dashboard to see if ECU stored any fault FI Error codes. This will make things easier.
You can also check / replace the relays on the bike. Fuel Pump relay can sometimes fail.
-
- You must be logged in to reply to this topic.