Register
FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 5 reply threads
  • Author
    Posts
    • #7911
      Stuart Holland
      Participant

      Put new fuel filter on and idle adjust not working any ideas thanks

    • #7917
      ♠️ M77
      Keymaster

      Hello Stuart, can you please show us your fuel filter so i can see it is fitted in the right way
      (they flow properly in one direction)

      Also it helps us see how you set up the pipes too.

    • #7931
      Stuart Holland
      Participant

    • #7933
      Stuart Holland
      Participant

    • #7934
      Stuart Holland
      Participant

      Sent 2 pics if fuel filter

    • #7935
      ♠️ M77
      Keymaster

      It looks correct, i can’t see how that will stop the bike running to be fair.

      It sounds something else has gone off during the assembly  / disassembly of the bike.

      Also idle-adjuster is under the coils   or it is near the front carb if korea put a short one.

      I can see fuel in the filter, it is flowing. So that leaves out the tap & pump.

      However, check vacuum leaks with a carb cleaner by spraying the intake pipes and check air pipes for any splits or kinks  or bends

      Also Hyosungs don’t like E10 , the carb 125s will usually make sure to punish the owner eventually when it keeps using e10. So if you have e10 , get rid of it and be ready to clean the carbs by only ULTRASONIC or AIR COMPRESSOR  —- (Rattle cans won’t do the job, they aint agressive enough)

Viewing 5 reply threads
  • You cannot reply to this topic.