Register
FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 5 reply threads
  • Author
    Posts
    • #18871
      ertkz
      Participant

      Hello, which engine is compatible with a Hyosung starter gear? It is difficult to find it in our country. Does anyone have information on the compatible model?

    • #18872
      ertkz
      Participant

      Starter clutch gear

    • #18873
      ♠️ M77
      Keymaster

      Just the Hyosung GT250R   ,  and there is 3 variations of it   (Carby Gen 1 , Carby Gen 2 (pre-efi/last batch) , and EFi  = These also depend on the “sprag clutch” you have. So you can’t just mix and match between different Hyosung models.

      Get some pictures of your gear on here and I will tell you which version you have.

      Yes it is hard to get new ones globally because Hyosung has stopped making them  for older models,   but they made new ones only compatible with GV250DR 2018 and  GV250DRA 2020-2028 Japan model.   No news on GT bikes yet, they are busy updating the GV models first.

    • #18874
      ertkz
      Participant

      Sadece Hyosung GT250R ve bunun 3 çeşidi var (Carby Gen 1, Carby Gen 2 (efi öncesi/son parti) ve EFi = Bunlar ayrıca sahip olduğunuz “sprag kavramasına” da bağlıdır. Yani farklı Hyosung modelleri arasında karıştırıp eşleştiremezsiniz. Ekipmanınızın birkaç fotoğrafını buraya koyun, size hangi versiyona sahip olduğunuzu söyleyeyim. Evet, Hyosung eski modeller için üretmeyi bıraktığı için global olarak yenilerini bulmak zor, ancak yalnızca GV250DR 2018 ve GV250DRA 2020-2028 Japonya modeliyle uyumlu yenilerini ürettiler. GT bisikletleri hakkında henüz bir haber yok, önce GV modellerini güncellemekle meşguller.

       

      carburetor model and I have a ruble 42mm clutch the issue is that it has the same external dimension and a gear that will enter the crank compatible model Yamaha Suzuki Honda etc etc

    • #18875
      ertkz
      Participant

      I am a mechanic and we found many Universal parts for the engine but finding the starter gear compatible is really confusing

    • #18877
      ♠️ M77
      Keymaster

      I am a mechanic and we found many Universal parts for the engine but finding the starter gear compatible is really confusing

      That’s because it’s proprietary to Hyosung , they make it themselves instead of outsourcing it.  Unless you find another bike that has an identical flywheel and crankshaft as the GT250R and will run your stator properly and also the ECU/CDI was programmed for that flywheel’s timing points.

      Regards

Viewing 5 reply threads
  • You cannot reply to this topic.