High beam upgrade – GT250Ri
- This topic has 4 replies, 3 voices, and was last updated 6 months ago by
.
-
Posts
-
-
Bike Model = : Gt250Ri
Hello, is there any way to upgrade the high beam light? I changed it to a Philips Xtreme vision as recommended somewhere else in the forum, but the visibility is really bad, low beam is ok but when I change to high beam it gives even a worse light than the low beam.
I don’t thought that by putting a new bulb it would improve but it’s literally unusable, is there any way to fix this? Maybe someone has tried LED bulbs?
-
-
Add a relay up front (under the instruments) – helps getting ALL the voltages to the bulb.
Old and grumpy,(?), have fairly wide engine & tuning experience, "restoring/resto-mod" on cars & mc, worked as electronic tech. (retired).
GT125R - sold. New (used): 2012-GT250R-efi (sold)+ 2017-GV-125C (sold) - got my old 2018-GT-125R back... 🙂
-
Add a relay up front (under the instruments) – helps getting ALL the voltages to the bulb.
https://hyoriders.club/forums/topic/gt125r-in-norway/embed/#?secret=lFDq3arSng#?secret=q5GpypjbHR
Same bulb and everything? just add that to the circuit? Is the improvement noticeable? Sorry, I don’t have much experience with vehicle electronics hahaha
-
The (front mounted) relay eliminates the long wiring from the rear-mounted relay, and the losses due to thin wiring and connectors.
Often retrofitted to older cars (pre-80’s) as a simple upgrade…
Old and grumpy,(?), have fairly wide engine & tuning experience, "restoring/resto-mod" on cars & mc, worked as electronic tech. (retired).
GT125R - sold. New (used): 2012-GT250R-efi (sold)+ 2017-GV-125C (sold) - got my old 2018-GT-125R back... 🙂
-
- You must be logged in to reply to this topic.