Help
- This topic has 3 replies, 2 voices, and was last updated 3 years ago by .
Viewing 3 reply threads
-
Posts
-
-
-
-
You can heat up that area a bit since heat causes metal to expand slightly and soak in some old bike oil between the pipe and the reducer, so you want the walls to slip up and pull it out.
in the end with penetrating oil, angle grinder and 3 hours, it’s finally out….. turns out they used JB weld the b****ds.
-
You can heat up that area a bit since heat causes metal to expand slightly and soak in some old bike oil between the pipe and the reducer, so you want the walls to slip up and pull it out.
in the end with penetrating oil, angle grinder and 3 hours, it’s finally out….. turns out they used JB weld the b****ds.
That’s just evil lol. Glad u got it sorted.
-
Bought a new exhaust (Yoshimura) and the reducer is wedged and wont come out, any tips on getting the bugger out???
Viewing 3 reply threads
- You must be logged in to reply to this topic.