Hello From Croatia
- This topic has 10 replies, 3 voices, and was last updated 4 months, 1 week ago by
.
-
Posts
-
-
-
-
Now about on 60 000km
Ride it this season and then next summer repaint it,change all ball bearing shim the valves ,fork repair
I want to buy one for parts
I need to figure out how to send pictures 😅
She has an homemade regulator with lifetime guatantie ,and an carbin Slip on
Wich is nice but need to build a db killer for it when im comming home from the country in the city on night
-
https://drive.google.com/drive/folders/1MmSfsj2Pf5uGy3DcW5JvC89kNpoXVExC
Is it correct like this ,link from google drive
-
I’ve uploaded them here for you. Just click the “Add media” button when reply, so it uploads directly to the site. Google Drive is a good backup! (â)
That regulator is very big! :-O , where did you even mount it ?
I hate doing Forks , so good luck , as sometimes it is a stressful job doing USD forks, when your forks are apart , get “FORK GAITERS” to protect the chrome & seals from bursting!
10W fork oil is good. 15W is too stiff , factory is 5w but its too bouncy!
-
-
-
I had luck that the wiring and ECU are Mitsubishi like mine ,just the Tacho is black and green ,runs well ,forks are oily from wheelies but im happy that i bought it
The red one currently on 65 000km
The regulator is made by a man that builds regulators www .sper.hr it goes under the left fender but poorly air flow but i had no problems with it since its big
-
-
-
Hello I need help with the electric wiring on my Hyosung Rx 125
I don’t have the wire harness for it and I want to make it spark
I have original CDI, original magnetou, original regulator,original pick up coil,original spark coil .I think is a DC electric sistem because it only have 5 wire from the motor 3 yellow 1 green 1 blue if anyone can help
Thanks from Romania
-
- You cannot reply to this topic.
- This topic has 10 replies, 3 voices, and was last updated 4 months, 1 week ago by .
-
Posts
-
-
-
-
Now about on 60 000km
Ride it this season and then next summer repaint it,change all ball bearing shim the valves ,fork repair
I want to buy one for parts
I need to figure out how to send pictures 😅
She has an homemade regulator with lifetime guatantie ,and an carbin Slip on
Wich is nice but need to build a db killer for it when im comming home from the country in the city on night
-
https://drive.google.com/drive/folders/1MmSfsj2Pf5uGy3DcW5JvC89kNpoXVExC
Is it correct like this ,link from google drive
-
I’ve uploaded them here for you. Just click the “Add media” button when reply, so it uploads directly to the site. Google Drive is a good backup! (â)
That regulator is very big! :-O , where did you even mount it ?
I hate doing Forks , so good luck , as sometimes it is a stressful job doing USD forks, when your forks are apart , get “FORK GAITERS” to protect the chrome & seals from bursting!
10W fork oil is good. 15W is too stiff , factory is 5w but its too bouncy!
-
-
-
I had luck that the wiring and ECU are Mitsubishi like mine ,just the Tacho is black and green ,runs well ,forks are oily from wheelies but im happy that i bought it
The red one currently on 65 000km
The regulator is made by a man that builds regulators www .sper.hr it goes under the left fender but poorly air flow but i had no problems with it since its big
-
-
-
Hello I need help with the electric wiring on my Hyosung Rx 125
I don’t have the wire harness for it and I want to make it spark
I have original CDI, original magnetou, original regulator,original pick up coil,original spark coil .I think is a DC electric sistem because it only have 5 wire from the motor 3 yellow 1 green 1 blue if anyone can help
Thanks from Romania
-
- You cannot reply to this topic.