Register
FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 1 reply thread
  • Author
    Posts
    • #12052
      JB
      Participant

      Hi All,

      Having a nightmare trying to take of the airbox on my gv650 carby model.

      Can see the srews holding the airbox clamps onto the carby air intakes but physically cannot reach them due to something looking like an aircraft mounting plate cum bash plate right in the way.

      Any tips or advice from seasoned players?

      Cheers,

      James

      Adelaide, SA

    • #12054
      ♠️ M77
      Keymaster

      Hey,

      Can you attach a few pictures here if possible so we can see the situation better ?

      Can you also drain the carbs => leave them attached to the airbox , unscrew the intake rubber clamps towards the engine heads , then unhook the throttle / choke cables off

      Then lift the airbox out of the bike with the carbs attached to it gently ? (Thats ofcourse if the airbox is screwed off  the frame to lift it off)

      Again, see where we are with your pics.

      GV125/GV250 are wayyyy more difficult for first time users thats why myself & another owner had to make 2 tutorials of airbox removals on the smaller sisters of the GV series.

Viewing 1 reply thread
  • You cannot reply to this topic.