This is just a post to let people know what i found/did to fix my coolant fan switch problem. My coolant switch was not working, so the fan never came on. I looked at getting an original Hyosung switch, but the used one i got on ebay didn’t work either, and the original was quite pricey, as its an older bike and parts are getting scarce, i’m assuming… There are a few sites you can order them, but i did find a switch that works on ebay and amazon. it’s NOT a hyosung part, and doesn’t have the probe portion sticking into the coolant, but it DOES work. Verified the fan kicks on when the temp rises. If anyone is interested, its listed as a replacement for part number 19206-115-0000, or 19206-102-000. That seems to translate to the part for a Hisun UTV 400, 700, and 800. You will have to wire in the connector (you can find one that comes with the sensor), but again, it’s the right thread size that fits right in, and again, it works.
Well, i hope this helps anyone struggling with a coolant fan switch, if you’re into a little re-wiring.