Register
FORUM ARCHIVE: Boards are now read-only as archives. For bike service manual downloads, parts shop, or to read more about the forum changes, tap here to read more....
Viewing 5 reply threads
  • Author
    Posts
    • #14387
      Barry mcclinton
      Participant

      Hi guys

      Iv pick up a GT125R that only needed a little work pmsl. Im going to upgrade my main jets to 90/92.5s, there was a bit of work done on it before I got it to get it started. This said that the pilot jents are to small. If I’m upgrading the main jets (bigger) will the pilots need to be larger to accommodate them? Thanks for any help

    • #14397
      ♠️ M77
      Keymaster

      What size are the pilot jets ?

      Also main jets do not need bigger pilots as the main jets only kick in when you’re in 1st gear beyond 5mph ,  otherwise Pilots do the idling, starting, crawling (2mph+ until the main jet circuit switches when slides lift.)

    • #14399
      Barry mcclinton
      Participant
    • #14402
      ♠️ M77
      Keymaster

      What size are the Pilot Jets specifically?  The skinny tall ones.

    • #14407
      Barry mcclinton
      Participant

      Hi iv gotta be honest I have no idea, iv looked online but no luck. Iv just printed out the workshop manual so will check though it 👍

    • #14409
      ♠️ M77
      Keymaster

      Hi iv gotta be honest I have no idea, iv looked online but no luck. Iv just printed out the workshop manual so will check though it 👍

      Open the carb 1 more time , and use a bright torch, remove the skinny jets carefully  (they are like skyscrapper by itself) , then under the bright torch tell us the number of the jet. I couldn’t respond to the email until i saw this thread first , so it’s easier to make any quotes , if the pilot jets are ok, no need for new ones forever unless they are in bad condition.

Viewing 5 reply threads
  • You cannot reply to this topic.