GT 250r relays
- This topic has 3 replies, 3 voices, and was last updated 11 months ago by .
-
Posts
-
-
-
If you have a GT250R that is carb model , it uses 2 relays
- lights control = 4pin. By the battery
- turn signals = 3 pin. by the battery too.
For starting the bike , it will be a “golfball” shaped Solenoid that has 1x thick battery wire going straight to it. and a 2pin plug from the harness (CDI and switch gear triggers it) and other side of the solenoid, has a long wire going to the starter motor.
-
Heya bro where can i get these 2 relays. The lights control and turn signals? have no headlights, indicators, lcd screen or brake lights (08 gt250r) bike starts n rides so I assume relays are gone
This topic is old now and was made by the original poster, so it is advised to make a new topic if you can.
Relays = ebay , like this one:
https://www.ebay.co.uk/itm/256865891537Indicators (Turn Signals) = If you have LED indicators, then get an LED Motorcycle Relay 3 Pin from places like Amazon too.
-
Relays are not marked does anyone know what the posts are.
- The topic ‘GT 250r relays’ is closed to new replies.