Fuel system Hyosung gv125 aquila carby 2009
- This topic has 3 replies, 3 voices, and was last updated 1 year, 4 months ago by
.
-
Posts
-
-
Hi could anyone help me the bike starts on choke but when I take the choke off and reve it dies the carb has been cleaned it ran great then the next day it is spluttering as if it starved of fuel I have checked if the float bowls they are OK iam wondering if I have missed something could anyone please give some suggestions any help would be appreciated
Thanks
John
-
-
-
Have a look at this too:
How to change / upgrade fuel lines & fuel filter on CARBY GV125 & GV250 Diagram
Also , if the carbs came out, maybe it is possible the intake o-rings need replacing ?
Look at this below:[Guide] Intake boot manifold removal GV125C / GV250 Carby (Air Box Tutorial)
if the o-rings under those pipes don’t sit right, you will get all you just described.
If not, triple check the floats were not accidently bent even just 1mm error , may mean too much fuel or too little fuel
See here , and scroll to where it says check float height in that topicGT/GV= Same engine, same carbs.
-
- You cannot reply to this topic.
- This topic has 3 replies, 3 voices, and was last updated 1 year, 4 months ago by .
-
Posts
-
-
Hi could anyone help me the bike starts on choke but when I take the choke off and reve it dies the carb has been cleaned it ran great then the next day it is spluttering as if it starved of fuel I have checked if the float bowls they are OK iam wondering if I have missed something could anyone please give some suggestions any help would be appreciated
Thanks
John
-
-
-
Have a look at this too:
How to change / upgrade fuel lines & fuel filter on CARBY GV125 & GV250 Diagram
Also , if the carbs came out, maybe it is possible the intake o-rings need replacing ?
Look at this below:[Guide] Intake boot manifold removal GV125C / GV250 Carby (Air Box Tutorial)
if the o-rings under those pipes don’t sit right, you will get all you just described.
If not, triple check the floats were not accidently bent even just 1mm error , may mean too much fuel or too little fuel
See here , and scroll to where it says check float height in that topicGT/GV= Same engine, same carbs.
-
- You cannot reply to this topic.