Custom made twin pipe – GV125 Exhaust
- This topic has 6 replies, 2 voices, and was last updated 1 month ago by
.
-
Posts
-
-
I’ve recently installed a custom made twin pipe (not made by myself) and I’ve been told to upjet the carbs does anyone have any recommendations on what size to upjet too and do I do both carbs or just one and do I do both jets or just one I’m new to these bikes thanks in advance 👏🏼
-
The recommended jetting is 90 and 92.5 for the 125cc , same goes even for the leovince twin custom pipes made in italy too. Pilot Jets = They stay the same forever.
Go in tutorial section and look for these tutorials
- Slide Mod (good mod)
- How to remove the intake pipes (very delicate rare parts now!)
- How to remove the airbox off the bike a proper way
- Carb Jetting
Regards
// Meditation doesn't mean you have to sit still....
-
-
It’s okay, i will find a way to simplify this site even more so there is less things to click around!
Here you go:
Regards
// Meditation doesn't mean you have to sit still....
-
-
-
Where is the best place to get upgraded jets from?
EBC UK makes em or KeyStar Japan , I may have some in stock (as i keep a few for GT customers upgrading to K&N filters) , send an email. Or any ask any local hyosung dealer such as TNorthEast (one word) online as they are one of the oldest dealers still doing hyo parts, ring them for jets.
// Meditation doesn't mean you have to sit still....
-
Gv125 classic
- You must be logged in to reply to this topic.