carburettor – GV650 2006
- This topic has 1 reply, 2 voices, and was last updated 2 years ago by
.
Viewing 1 reply thread
-
Posts
-
-
hi, I got a sports air filter home today.
there were dowels for the caboature.the size that came with it was #130.
but when I open up to the cabuator there was size #147.5 in it?
and that with oem air filter in it.
now, but I think that 147.5 is more than 130, so only put the sport air filter in.
but it cannot run at full throttle when it is in.
it can only run at full throttle with an oem filter in it?
which dowel does the gv 650 from 2006 use?
-
See this picture below from the service manual
- Your carb uses OEM 125 size and 122.5 jets
- Check your “Slide Needle” is on Rich mode instead of Lean (click here for example on 125/250cc)
- Check your “Mixture Screw” , screw all of them slowly to zero (clockwise) , then undo them counterclockwise 2.5 full turns each.
- Get new spark plugs again (Use only CR8E)
- Check carb float height is 7mm (click here for 125/250cc example)
- Clean the carb hard
- Test Ride and let us know.
Also do not forget to upload pictures of your spark plug colours.
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.