Aquila GV125 2002 – Front Brake Switch Removal
- This topic has 1 reply, 2 voices, and was last updated 5 months ago by
.
Viewing 1 reply thread
-
Posts
-
-
Hi, does anybody know how to unplug these cable connector from levers ? As they seems to don’t have classic double pin at end and they just don’t wanna go out, I must change whole bars with levers because of snapped bolt at clutch side, but I can’t get these out, and don’t wanna just snap it. Many thanks
-
Push the whole cable outwards , as that switch is slot fitted . So push the cable instead of pulling it.
Switch is one-piece unit , it is the classic style before newer bikes had the switch changed entirely (as did their master cylinders too)
// Meditation doesn't mean you have to sit still....
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.