Forums 🚦 HYOSUNG CULTURE 😃 General Chat Aftermarket ST7 exhaust
- This topic has 4 replies, 4 voices, and was last updated 4 months ago by ♠️ MARCEL.
-
AuthorPosts
-
-
Jul 14, 2024 at 8:25 AM #14125
Afternoon all,
I am trying to find a set of aftermarket pipes for my 2013 ST7, preferably in Australia but open to over seas.
we use to have a place called jodo exhaust but they seem to have gone under.
any recommendations greatly appreciated
-
Jul 14, 2024 at 7:17 PM #14133
We haven’t got any makers in UK to recommend sadly as we have an exhaust maker called BLACK WIDOW but they only make pipes for the GT250/Gt125 now and we have Leovince in Italy that’s still making pipes for the lower CC class.
So the ST7 might need to use its own stock pipes or provide your stock pipes to a local exhaust fabricator to see if he can do any custom work for you ? Hey , he might open a new market for hgimself?
Or make some kind of “Y” shape pipe can be fabricated for you to join to the 2 pipes in to a single 51mm outlet which lets you use most full size 51mm mufflers ?
// Meditation doesn't mean you have to sit still....
-
Jul 20, 2024 at 9:36 PM #14187
Have you tried Korea spares very good
Regards
-
Jul 21, 2024 at 1:16 PM #14189
About 3yrs ago Leovince were listing the GV650 replacement systems on ebay as being compatible with the ST7. Looking at the parts diagrams for both there does seem to be minor mounting differences though, in any case I’ve not seen these listed for a while.
It’s a shame as the standard ST7 silencers are rather large and inelegant imo. Also rather quiet even for this elderly person.
-
Jul 21, 2024 at 6:11 PM #14193
You could always mofidy the stock cannon, to be half the size , and rivet the end tip again, this allows a chance to remove some of the “silencing” parts inside or drill a bigger bore at the end tip so it is a little more freeflowing and louder
Creative work here, but just a thought!
// Meditation doesn't mean you have to sit still....
-
-
AuthorPosts
- You must be logged in to reply to this topic.